2017 07 v.37 727-738
刀具涂层的研究进展及最新制备技术
基金项目(Foundation):
国家自然科学基金项目(51301181);;
天津市应用基础与前沿技术研究计划(15JCZDJC39700);;
天津市科技特派员项目(16JCTPJC49500);;
天津市高等学校创新团队培养计划项目(TD12-5043)
邮箱(Email):
DOI:
10.13922/j.cnki.cjovst.2017.07.15
中文作者单位:
天津职业技术师范大学天津市高速切削与精密加工重点实验室;
摘要(Abstract):
刀具涂层是机械加工行业实现高效率、高精度、高柔性和绿色制造的有效途径,其优异的综合性能不仅可延长刀具的使用寿命,而且能大幅度提升机械加工效率和零件的表面加工质量,尤其针对钛合金、高温合金等难加工材料的切削,极大降低了加工成本。文章概述了刀具涂层的特点、类别及刀具涂层材料的应用,总结了化学气相沉积技术、物理气相沉积技术、物理化学气相沉积技术的原理及优缺点。阐述了刀具涂层的发展历程,即从常用涂层到纳米复合涂层、功能梯度涂层等新型涂层,并对新型刀具涂层和最新制备技术的发展做了简单的分析与介绍。
关键词(KeyWords):
刀具涂层;;磁控溅射;;电弧离子镀;;离子束辅助沉积;;切削性能
| 2,478 | 63 | 58 |
| 下载次数 | 被引频次 | 阅读次数 |
参考文献
[1]陈建新.发动机机械加工件新技术及应用[J].金属加工(冷加工),2010,19:12-15
[2]张而耕,张体波.涂层刀具的有限元分析[J].辽宁工程技术大学学报(自然科学版),2016,35(5):523-517
[3]康勃,马瑞新,吴中亮,等.现代刀具涂层制备技术的研究现状[J].表面技术,2008,37(2):71-74
[4]Sortino M,Belfio S,Totis G,et al.Innovative Tool Coatings for Increasing Tool Life in Milling Nickel-Coated Nickel-Silver Alloy[J].Procedia Engineering,2015,100:946-952
[5]吴忠振,朱宗涛,巩春志,等.高功率磁控脉冲溅射技术的发展与研究[J].真空,2009,46(3):18-22
[6]王宝友,崔丽华.涂层刀具的涂层材料、涂层方法及发展方向[J].机械,2002,29(4):63-64
[7]Beake B D,Li N,Gey C,et al.Wear Performance of Different PVD Coatings during Hard Wet end Millingof H13Tool Steel[J].Surface&Coatings Technology,2015,279:118-125
[8]Henderer W,Xu F.Hybrid Ti Si N,Cr C/C PVD Coatings Applied to Cutting Tools[J].Surface&Coatings Technology,2013,215:381-385
[9]王启民,黄健,王成勇,等.高速切削刀具物理气相沉积涂层研究进展[J].航空制造技术,2013,19(14):78-83
[10]赵海波,周彤,梁红樱,等.刀具涂层的分类与应用[J].工具技术,2005,39(12):14-17
[11]孙加林,周咏辉,邓建新.织构化涂层刀具研究进展[J].工具技术,2015,49(7):3-7
[12]林成虎,周彤,任靖日,等.涂层刀具在机械加工中的应用实例[J].延边大学学报(自然科学版),2012,38(1):92-94
[13]Cristofaro S D,Funaro N,Feriti G C,et al.High-Speed Micro-Milling:Novel Coatings for Tool Wear Reduction[J].International Journal of Machine Tools&Manufacture,2012,63:16-20
[14]Beake B D,Fox-Rabinovich G S.Progress in High Temperature Nanomechanical Testing of Coatings for Optimising their Performance in High Speed Machining[J].Surface&Coatings Technology,2014,255:102-111
[15]张庆.刀具材料的应用与发展[J].热处理,2006,21(4):8-12
[16]于启勋.硬质合金刀具材料技术水平的进展[J].《新技术新工艺》·展会综述,2007,(5):8-10
[17]刘建永,吴连连.高速切削刀具材料的研究进展[J].热处理技术与装备,2012,33(1):39-41
[18]ivanovi C'E N.Influence of Combined Gas and Vacuum Breakdown Mechanisms on Memory Effect in Nitrogen[J].Vacuum,2014,107:62-67
[19]Qiu S,Ren S Q,Huang L Q,et al.Influence of Different Vacuum Conditions on the Distribution of Insoluble Inclusions in a Multi-Crystalline Silicon Ingot[J].Vacuum,2016,128:66-72
[20]Ustinov A I,Melnichenko T V,Liapina K V,et al.Structure and Properties of Porous Nickel and Copper Fllms Produced by Vacuum Deposition from the Vapour Phase[J].Vacuum,2017,141:272-280
[21]Saketi S,Olsson M.Influence of CVD and PVD coating micro topography on the initial material transfer of 316L stainless steel in sliding contacts-A laboratory study[J].Wear,2016:12
[22]刘晓红,陈志勇,邓山江.气相沉积技术的现状与发展[J].华北航天工业学院学报,2006,16(3):26-28
[23]吴笛.物理气相沉积技术的研究进展与应用[J].机械工程与自动化,2011,(4):214-216
[24]Bouzakis K D,Michailidis N,Skordarisa G,et al.Cutting with Coated Tools:Coating Technologies,Characterization Methods and Performance Optimization[J].CIRP Annals-Manufacturing Technology,2012,61(2):703-723
[25]Strnad G,Buhagiar J.Lastest developments in PVD Coatings for Tooling[J].Scientific Bulletin of the“Petru Major”University of Targu Mures,2010,7(XXIV)(1):32-37
[26]Bobzin K,Br9gelmann T,Kalscheuer C,et al.Hybrid dcMS/HPPMS PVD Nitride and Oxynitride Hard Coatings for Adhesion and Abrasion Reduction in Plastics Processing[J].Surface&Coatings Technology,2016,308:349-359
[27]国政,陈强,王正铎,等.化学气相沉积/原子层沉积铜前驱体的研究进展[J].真空科学与技术学报,2015,35(10):1282-1290
[28]谢文峰,刘佳佳,Hernondez Karla,等.化学气相沉积二硫化钼薄膜的研究进展[J].武汉理工大学学报,2016,38(4):31-37
[29]刘志宏,张淑英,刘智勇,等.化学气相沉积制备粉体材料的原理及研究进展[J].粉末冶金材料科学与工程,2009,14(6):359-364
[30]Aydin O I,Hallam T,Thomassin J L,et al.Interface and Strain Effects on the Fabrication of Suspended CVD Graphene Devices[J].Solid-State Electronics,2015,108:75-83
[31]Wei Q P,Yu Z M,Ashfold M N R,et al.Effects of Thickness and Cycle Parameters on Fretting Wear Behavior of CVD Diamond Coatings on Steel Substrates[J].Surface&Coatings Technology,2010,205(1):158-167
[32]马胜利,徐可为,介万奇.气相沉积制备硬质薄膜技术与应用述评[J].真空科学与技术学报,2002,22(6):438-443
[33]郭杰,徐看,刘利国,等.刀具涂层技术现状与发展趋势[J].工具技术,2014,48(3):3-7
[34]林有希,高诚辉,唐旭晨.切削刀具PVD涂层技术的研究与发展[J].机电技术,2003,(S1):88-92
[35]赵时璐,李友,张钧,等.刀具氮化物涂层的研究进展[J].金属热处理,2008,33(9):99-104
[36]马忠臣.刀具涂层技术与设备的最新发展与应用[J].机械工程师,2012,(4):13-16
[37]李裕国.涂层刀具技术发展现状[J].黑龙江科技信息,2008,(27):31+128
[38]张勤俭,赵路明,刘敏之,等.刀具涂层技术的研究现状和发展趋势[J].有色金属科学与工程,2014,5(2):20-25+32
[39]谭正海,鲜广,赵海波,等.切削刀具表面Ti CN涂层的研究现状与发展[J].2016,45(6):125-133
[40]Shan L,Wang Y X,Li J L,et al.Tribological Behaviours of PVDTi N and Ti CN Coatings in Artiflcial Seawater[J].Surface&Coatings Technology,2013,226(14):40-50
[41]Chen L,Xu Y X,Du Y,et al.Effect of Bilayer Period on Structure,Mechanical and Thermal Properties of Ti Al N/Al Ti N Multilayer Coatings[J].Thin Solid Films,2015,592:207-214
[42]Xu Y X,Chen L,Pei F,et al.Structure and Thermal Properties of Ti Al N/Cr N Multilayered Coatings with Various Modulation Ratios[J].Surface&Coatings Technology,2016,304:512-518
[43]Li D K,Chen J F,Zou C W,et al.Effects of Al Concentrations on the Microstructure and Mechanical Properties of Ti-Al-N Fllms Deposited by RF-ICPIS Enhanced Magnetron Sputtering[J].Journal of Alloys and Compounds,2014,609:239-243
[44]Chen L,Paulitsch J,Du Y,et al.Thermal Stability and Oxidation Resistance of Ti-Al-N Coatings[J].Surface&Coatings Technology,2012,206(11-12):2954-2960
[45]Chen J,Li H,Beake B D.Load Sensitivity in Repetitive Nano-Impact Testing of Ti N and Al Ti N Coatings[J].Surface&Coatings Technology,2016,308:289-297
[46]Xiao B J,Chen Y,Dai W,et al.Microstructure,Mechanical Properties and Cutting Performance of Al Ti N Coatings Prepared Via Arc Ion Plating Using the Arc Splitting Technique[J].Surface&Coatings Technology,2017,311:98-103
[47]Cai F,Zhang S H,Li J L,et al.Effect of Nitrogen Partial Pressure on Al-Ti-N Fllms Deposited by Arc Ion Plating[J].Applied Surface Science,2011,258(5):1819-1825
[48]Podgornik B,Sedlaflek M,Madirono D.Performance of Cr N Coatings Under Boundary Lubrication[J].Tribology International,2016,96:247-257
[49]戴翠丽.刀具表面涂层技术及发展趋势[J].科技风,2012,(20):89
[50]陈淑花.刀具涂层材料研究进展及应用[J].南方金属,2012,(2):9-11
[51]Cui Y X,Shen B,Sun F H.Influence of Amorphous Ceramic Interlayers on Tribological Properties of CVD Diamond Fllms[J].Applied Surface Science,2014,313:918-925
[52]Almeida F A,Fernandes A J S,Oliveira F J,et al.SemiOrthogonal Turning of Hardmetal with CVD Diamond and PCD Inserts at Different Cutting Angles[J].Vacuum,2009,83(10):1218-1223
[53]Linnik S A,Gaydaychuk A V.Application of Optical Emission Spectroscopy for the Determination of Optimal CVD Diamond Growth Parameters in Abnormal Glow Discharge Plasma[J].Vacuum,2014,103:28-32
[54]徐峰,左顿稳,张旭辉.左切削刀具用立方氮化硼涂层的研究进展[J].硅酸盐通报,2012,31(2):295-300
[55]刘战强.先进刀具设计技术:刀具结构、刀具材料与涂层技术[J].航空制造技术,2006,(7):38-42
[56]旷云峰.铝合金表面激光熔覆Al Fe Mn Si系多主元合金涂层的组织与性能研究[D].重庆理工大学,2015
[57]Salimon A I,Shevchukov A P,Stepashkin A A,et al.Mechanical Alloying as A Solid State Route for Fabrication of Al-Cu-M(=Fe,Cr)Quasicrystalline Phases[J].Journal of Alloys and Compounds,2017,707:315-320
[58]吴雁,李艳峰,张而耕,等.PVD涂层技术制备类金刚石薄膜及性能研究综述[J].表面技术,2016,45(8):115-123
[59]张而耕,陈强.类金刚石涂层的研究进展及其应用[J].粉末冶金工业,2015,25(5):60-65
[60]Veprek S,Veprek-Heijman M G J,Karvankova P,et al.Different Approaches to Superhard Coatings and Nanocomposites[J].Thin Solid Films,2005,476(1):1-29
[61]Musil J.Hard Nanocomposite Coatings:Thermal Stability,Oxidation Resistance and Toughness[J].Surface&Coatings Technology,2012,207:50-65
[62]Mayrhofer P H,Stoiber M.Thermal Stability of Superhard Ti-B-N Coatings[J].Surface&Coatings Technology,2007,201(13):6148-6153
[63]Veprek S,Veprek-Heijman M G J.Limits to the Preparation of Superhard Nanocomposites:Impurities,Deposition and Annealing Temperature[J].Thin Solid Films,2012,522:274-282
[64]赵文济,孔明,乌晓燕,等.Ti N/Si3N4纳米多层膜硬度对Si3N4层厚敏感性的研究[J].金属学报,2007,43(2):154-158
[65]周广宏,方冬,印凤,等.调制比对Ti/Ti B2多层膜结构和力学性能的影响[J].真空科学与技术学报,2015,35(7):819-824
[66]盛澄成,徐阳,乔辉,等.Zn O/Cu多层膜的制备及电磁屏蔽性能研究[J].功能材料,2016,47(8):8089-8093
[67]蒲飞,刘元富,徐向阳,等.激光表面合金化制备Ti C/Fe3Al复合涂层组织及Ti C演变规律[J].中国激光,2014,41(7):58-63
[68]Kim Y I,An G S,Lee W,et al.In-Situ Fabrication of Ti C-Fe3Al Cermet[J].Ceramics International,2017,43(8):5907-5913
[69]梁红玉,罗娟,颜雨飞.高熵合金在高速切削刀具上的应用及发展趋势[J].材料导报,2013,27(3):115-120
[70]李平,陈金凯,周晓东,等.高熵合金涂层的研究进展[J].材料保护,2015,48(4):44-46
[71]Liu Z Q,Meyers M A,Zhang Z F,et al.Functional Gradients and Heterogeneities in Biological Materials:Design Principles,Functions,and Bioinspired Applications[J].Progress in Materials Science,2017,88:467-498
[72]Autissier E,Richou M,Bernard F,et al.Design Optimization of Plasma Facing Component with Functional Gradient Material Cu/W Interlayer[J].Fusion Engineering and Design,2013,88(9-10):1714-1717
[73]Carneiro M B,Machado I F.Sintering and Model of Thermal Residual Stress for Getting Cutting Tools from Functionally Gradient Materials[J].Procedia CIRP,2013,8:200-205
[74]刘华炜,刘学武,张广文.功能梯度材料制备工艺及研究进展[J].机械设计与制造,2012,(4):265-267
[75]Erkens G,Vetter J,Müller J,et al.SIBONICA,The next Generation of Highest Oxidation Resistant Tool Coatings Synthesised by Means of Novel High Ionization Hybrid PVD Processing HI3[J].工具技术,2013,47(9):18-24
[76]Erkens G,Vetter J,Müller J,et al.“唯一真正”的高能效混合工艺——苏尔寿HI3 PVD技术开创新一代高性能涂层[J].工具技术,2013,47(5):3-7
[77]Golosov D A.Balanced Magnetic Fleld in Magnetron Sputtering Systems[J].Vacuum,2017,139:109-116
[78]邱家稳,赵栋才.电弧离子镀技术及其在硬质薄膜方面的应用[J].表面技术,2012,41(2):93-100+104
[79]王启民,张小波,张世宏,等.高功率脉冲磁控溅射技术沉积硬质涂层研究进展[J].广东工业大学学报,2013,30(4):1-13
[80]Ferrec A,Kéraudy J,Jouan P Y.Mass Spectrometry Analyzes to Highlight Differences between Short and Long Hi PIMS Discharges[J].Applied Surface Science,2016,390:497-505
[81]AAnders A.A Review Comparing Cathodic Arcs and High Power Impulse Magnetron Sputtering(Hi PIMS)[J].Surface&Coatings Technology,2014,257:308-325
[82]冯丹.离子束辅助沉积Ti-Cu-N纳米复合膜[D].沈阳理工大学,2015
[83]张栋,孙丽丽,王振玉,等.离子束辅助磁控溅射沉积薄膜Cr Nx结构以及力学性能研究[J].真空科学与技术学报,2013,33(12):1237-1241
[84]Twardowska A,Morgiel J,Rajchel B.Thermally Induced Crystallization of Ti BxThin Film after Deposition by Dual Beam IBAD Method,Materials Today Proceedings[J].2016,3(8):2646-2651
[85]王金晓,王志民,冯煜东,等.氧离子能量对离子束辅助沉积Al2O3薄膜的结构及光学性能的影响[J].真空科学与技术学报,2012,32(8):705-709
[86]张启沛,钟喜春,李春明,等.磁过滤电弧离子镀Ti N薄膜的制备及性能研究[J].真空科学与技术学报,2015,35(4):444-450
[87]王宇,黄美东,邬岩,等.脉冲偏压磁过滤电弧离子沉积(Ti,Al)N薄膜的研究[J].真空,2016,53(2):21-24
[88]Zhou H,Hou Q Y,Xiao T Q,et al.The Composition,Icrostructure and Mechanical Properties of Ni/DLC nanocomposite Films by Filtered Cathodicvacuum Arc Deposition[J].Diamond&Related Materials,2017,75:96-104
[2]张而耕,张体波.涂层刀具的有限元分析[J].辽宁工程技术大学学报(自然科学版),2016,35(5):523-517
[3]康勃,马瑞新,吴中亮,等.现代刀具涂层制备技术的研究现状[J].表面技术,2008,37(2):71-74
[4]Sortino M,Belfio S,Totis G,et al.Innovative Tool Coatings for Increasing Tool Life in Milling Nickel-Coated Nickel-Silver Alloy[J].Procedia Engineering,2015,100:946-952
[5]吴忠振,朱宗涛,巩春志,等.高功率磁控脉冲溅射技术的发展与研究[J].真空,2009,46(3):18-22
[6]王宝友,崔丽华.涂层刀具的涂层材料、涂层方法及发展方向[J].机械,2002,29(4):63-64
[7]Beake B D,Li N,Gey C,et al.Wear Performance of Different PVD Coatings during Hard Wet end Millingof H13Tool Steel[J].Surface&Coatings Technology,2015,279:118-125
[8]Henderer W,Xu F.Hybrid Ti Si N,Cr C/C PVD Coatings Applied to Cutting Tools[J].Surface&Coatings Technology,2013,215:381-385
[9]王启民,黄健,王成勇,等.高速切削刀具物理气相沉积涂层研究进展[J].航空制造技术,2013,19(14):78-83
[10]赵海波,周彤,梁红樱,等.刀具涂层的分类与应用[J].工具技术,2005,39(12):14-17
[11]孙加林,周咏辉,邓建新.织构化涂层刀具研究进展[J].工具技术,2015,49(7):3-7
[12]林成虎,周彤,任靖日,等.涂层刀具在机械加工中的应用实例[J].延边大学学报(自然科学版),2012,38(1):92-94
[13]Cristofaro S D,Funaro N,Feriti G C,et al.High-Speed Micro-Milling:Novel Coatings for Tool Wear Reduction[J].International Journal of Machine Tools&Manufacture,2012,63:16-20
[14]Beake B D,Fox-Rabinovich G S.Progress in High Temperature Nanomechanical Testing of Coatings for Optimising their Performance in High Speed Machining[J].Surface&Coatings Technology,2014,255:102-111
[15]张庆.刀具材料的应用与发展[J].热处理,2006,21(4):8-12
[16]于启勋.硬质合金刀具材料技术水平的进展[J].《新技术新工艺》·展会综述,2007,(5):8-10
[17]刘建永,吴连连.高速切削刀具材料的研究进展[J].热处理技术与装备,2012,33(1):39-41
[18]ivanovi C'E N.Influence of Combined Gas and Vacuum Breakdown Mechanisms on Memory Effect in Nitrogen[J].Vacuum,2014,107:62-67
[19]Qiu S,Ren S Q,Huang L Q,et al.Influence of Different Vacuum Conditions on the Distribution of Insoluble Inclusions in a Multi-Crystalline Silicon Ingot[J].Vacuum,2016,128:66-72
[20]Ustinov A I,Melnichenko T V,Liapina K V,et al.Structure and Properties of Porous Nickel and Copper Fllms Produced by Vacuum Deposition from the Vapour Phase[J].Vacuum,2017,141:272-280
[21]Saketi S,Olsson M.Influence of CVD and PVD coating micro topography on the initial material transfer of 316L stainless steel in sliding contacts-A laboratory study[J].Wear,2016:12
[22]刘晓红,陈志勇,邓山江.气相沉积技术的现状与发展[J].华北航天工业学院学报,2006,16(3):26-28
[23]吴笛.物理气相沉积技术的研究进展与应用[J].机械工程与自动化,2011,(4):214-216
[24]Bouzakis K D,Michailidis N,Skordarisa G,et al.Cutting with Coated Tools:Coating Technologies,Characterization Methods and Performance Optimization[J].CIRP Annals-Manufacturing Technology,2012,61(2):703-723
[25]Strnad G,Buhagiar J.Lastest developments in PVD Coatings for Tooling[J].Scientific Bulletin of the“Petru Major”University of Targu Mures,2010,7(XXIV)(1):32-37
[26]Bobzin K,Br9gelmann T,Kalscheuer C,et al.Hybrid dcMS/HPPMS PVD Nitride and Oxynitride Hard Coatings for Adhesion and Abrasion Reduction in Plastics Processing[J].Surface&Coatings Technology,2016,308:349-359
[27]国政,陈强,王正铎,等.化学气相沉积/原子层沉积铜前驱体的研究进展[J].真空科学与技术学报,2015,35(10):1282-1290
[28]谢文峰,刘佳佳,Hernondez Karla,等.化学气相沉积二硫化钼薄膜的研究进展[J].武汉理工大学学报,2016,38(4):31-37
[29]刘志宏,张淑英,刘智勇,等.化学气相沉积制备粉体材料的原理及研究进展[J].粉末冶金材料科学与工程,2009,14(6):359-364
[30]Aydin O I,Hallam T,Thomassin J L,et al.Interface and Strain Effects on the Fabrication of Suspended CVD Graphene Devices[J].Solid-State Electronics,2015,108:75-83
[31]Wei Q P,Yu Z M,Ashfold M N R,et al.Effects of Thickness and Cycle Parameters on Fretting Wear Behavior of CVD Diamond Coatings on Steel Substrates[J].Surface&Coatings Technology,2010,205(1):158-167
[32]马胜利,徐可为,介万奇.气相沉积制备硬质薄膜技术与应用述评[J].真空科学与技术学报,2002,22(6):438-443
[33]郭杰,徐看,刘利国,等.刀具涂层技术现状与发展趋势[J].工具技术,2014,48(3):3-7
[34]林有希,高诚辉,唐旭晨.切削刀具PVD涂层技术的研究与发展[J].机电技术,2003,(S1):88-92
[35]赵时璐,李友,张钧,等.刀具氮化物涂层的研究进展[J].金属热处理,2008,33(9):99-104
[36]马忠臣.刀具涂层技术与设备的最新发展与应用[J].机械工程师,2012,(4):13-16
[37]李裕国.涂层刀具技术发展现状[J].黑龙江科技信息,2008,(27):31+128
[38]张勤俭,赵路明,刘敏之,等.刀具涂层技术的研究现状和发展趋势[J].有色金属科学与工程,2014,5(2):20-25+32
[39]谭正海,鲜广,赵海波,等.切削刀具表面Ti CN涂层的研究现状与发展[J].2016,45(6):125-133
[40]Shan L,Wang Y X,Li J L,et al.Tribological Behaviours of PVDTi N and Ti CN Coatings in Artiflcial Seawater[J].Surface&Coatings Technology,2013,226(14):40-50
[41]Chen L,Xu Y X,Du Y,et al.Effect of Bilayer Period on Structure,Mechanical and Thermal Properties of Ti Al N/Al Ti N Multilayer Coatings[J].Thin Solid Films,2015,592:207-214
[42]Xu Y X,Chen L,Pei F,et al.Structure and Thermal Properties of Ti Al N/Cr N Multilayered Coatings with Various Modulation Ratios[J].Surface&Coatings Technology,2016,304:512-518
[43]Li D K,Chen J F,Zou C W,et al.Effects of Al Concentrations on the Microstructure and Mechanical Properties of Ti-Al-N Fllms Deposited by RF-ICPIS Enhanced Magnetron Sputtering[J].Journal of Alloys and Compounds,2014,609:239-243
[44]Chen L,Paulitsch J,Du Y,et al.Thermal Stability and Oxidation Resistance of Ti-Al-N Coatings[J].Surface&Coatings Technology,2012,206(11-12):2954-2960
[45]Chen J,Li H,Beake B D.Load Sensitivity in Repetitive Nano-Impact Testing of Ti N and Al Ti N Coatings[J].Surface&Coatings Technology,2016,308:289-297
[46]Xiao B J,Chen Y,Dai W,et al.Microstructure,Mechanical Properties and Cutting Performance of Al Ti N Coatings Prepared Via Arc Ion Plating Using the Arc Splitting Technique[J].Surface&Coatings Technology,2017,311:98-103
[47]Cai F,Zhang S H,Li J L,et al.Effect of Nitrogen Partial Pressure on Al-Ti-N Fllms Deposited by Arc Ion Plating[J].Applied Surface Science,2011,258(5):1819-1825
[48]Podgornik B,Sedlaflek M,Madirono D.Performance of Cr N Coatings Under Boundary Lubrication[J].Tribology International,2016,96:247-257
[49]戴翠丽.刀具表面涂层技术及发展趋势[J].科技风,2012,(20):89
[50]陈淑花.刀具涂层材料研究进展及应用[J].南方金属,2012,(2):9-11
[51]Cui Y X,Shen B,Sun F H.Influence of Amorphous Ceramic Interlayers on Tribological Properties of CVD Diamond Fllms[J].Applied Surface Science,2014,313:918-925
[52]Almeida F A,Fernandes A J S,Oliveira F J,et al.SemiOrthogonal Turning of Hardmetal with CVD Diamond and PCD Inserts at Different Cutting Angles[J].Vacuum,2009,83(10):1218-1223
[53]Linnik S A,Gaydaychuk A V.Application of Optical Emission Spectroscopy for the Determination of Optimal CVD Diamond Growth Parameters in Abnormal Glow Discharge Plasma[J].Vacuum,2014,103:28-32
[54]徐峰,左顿稳,张旭辉.左切削刀具用立方氮化硼涂层的研究进展[J].硅酸盐通报,2012,31(2):295-300
[55]刘战强.先进刀具设计技术:刀具结构、刀具材料与涂层技术[J].航空制造技术,2006,(7):38-42
[56]旷云峰.铝合金表面激光熔覆Al Fe Mn Si系多主元合金涂层的组织与性能研究[D].重庆理工大学,2015
[57]Salimon A I,Shevchukov A P,Stepashkin A A,et al.Mechanical Alloying as A Solid State Route for Fabrication of Al-Cu-M(=Fe,Cr)Quasicrystalline Phases[J].Journal of Alloys and Compounds,2017,707:315-320
[58]吴雁,李艳峰,张而耕,等.PVD涂层技术制备类金刚石薄膜及性能研究综述[J].表面技术,2016,45(8):115-123
[59]张而耕,陈强.类金刚石涂层的研究进展及其应用[J].粉末冶金工业,2015,25(5):60-65
[60]Veprek S,Veprek-Heijman M G J,Karvankova P,et al.Different Approaches to Superhard Coatings and Nanocomposites[J].Thin Solid Films,2005,476(1):1-29
[61]Musil J.Hard Nanocomposite Coatings:Thermal Stability,Oxidation Resistance and Toughness[J].Surface&Coatings Technology,2012,207:50-65
[62]Mayrhofer P H,Stoiber M.Thermal Stability of Superhard Ti-B-N Coatings[J].Surface&Coatings Technology,2007,201(13):6148-6153
[63]Veprek S,Veprek-Heijman M G J.Limits to the Preparation of Superhard Nanocomposites:Impurities,Deposition and Annealing Temperature[J].Thin Solid Films,2012,522:274-282
[64]赵文济,孔明,乌晓燕,等.Ti N/Si3N4纳米多层膜硬度对Si3N4层厚敏感性的研究[J].金属学报,2007,43(2):154-158
[65]周广宏,方冬,印凤,等.调制比对Ti/Ti B2多层膜结构和力学性能的影响[J].真空科学与技术学报,2015,35(7):819-824
[66]盛澄成,徐阳,乔辉,等.Zn O/Cu多层膜的制备及电磁屏蔽性能研究[J].功能材料,2016,47(8):8089-8093
[67]蒲飞,刘元富,徐向阳,等.激光表面合金化制备Ti C/Fe3Al复合涂层组织及Ti C演变规律[J].中国激光,2014,41(7):58-63
[68]Kim Y I,An G S,Lee W,et al.In-Situ Fabrication of Ti C-Fe3Al Cermet[J].Ceramics International,2017,43(8):5907-5913
[69]梁红玉,罗娟,颜雨飞.高熵合金在高速切削刀具上的应用及发展趋势[J].材料导报,2013,27(3):115-120
[70]李平,陈金凯,周晓东,等.高熵合金涂层的研究进展[J].材料保护,2015,48(4):44-46
[71]Liu Z Q,Meyers M A,Zhang Z F,et al.Functional Gradients and Heterogeneities in Biological Materials:Design Principles,Functions,and Bioinspired Applications[J].Progress in Materials Science,2017,88:467-498
[72]Autissier E,Richou M,Bernard F,et al.Design Optimization of Plasma Facing Component with Functional Gradient Material Cu/W Interlayer[J].Fusion Engineering and Design,2013,88(9-10):1714-1717
[73]Carneiro M B,Machado I F.Sintering and Model of Thermal Residual Stress for Getting Cutting Tools from Functionally Gradient Materials[J].Procedia CIRP,2013,8:200-205
[74]刘华炜,刘学武,张广文.功能梯度材料制备工艺及研究进展[J].机械设计与制造,2012,(4):265-267
[75]Erkens G,Vetter J,Müller J,et al.SIBONICA,The next Generation of Highest Oxidation Resistant Tool Coatings Synthesised by Means of Novel High Ionization Hybrid PVD Processing HI3[J].工具技术,2013,47(9):18-24
[76]Erkens G,Vetter J,Müller J,et al.“唯一真正”的高能效混合工艺——苏尔寿HI3 PVD技术开创新一代高性能涂层[J].工具技术,2013,47(5):3-7
[77]Golosov D A.Balanced Magnetic Fleld in Magnetron Sputtering Systems[J].Vacuum,2017,139:109-116
[78]邱家稳,赵栋才.电弧离子镀技术及其在硬质薄膜方面的应用[J].表面技术,2012,41(2):93-100+104
[79]王启民,张小波,张世宏,等.高功率脉冲磁控溅射技术沉积硬质涂层研究进展[J].广东工业大学学报,2013,30(4):1-13
[80]Ferrec A,Kéraudy J,Jouan P Y.Mass Spectrometry Analyzes to Highlight Differences between Short and Long Hi PIMS Discharges[J].Applied Surface Science,2016,390:497-505
[81]AAnders A.A Review Comparing Cathodic Arcs and High Power Impulse Magnetron Sputtering(Hi PIMS)[J].Surface&Coatings Technology,2014,257:308-325
[82]冯丹.离子束辅助沉积Ti-Cu-N纳米复合膜[D].沈阳理工大学,2015
[83]张栋,孙丽丽,王振玉,等.离子束辅助磁控溅射沉积薄膜Cr Nx结构以及力学性能研究[J].真空科学与技术学报,2013,33(12):1237-1241
[84]Twardowska A,Morgiel J,Rajchel B.Thermally Induced Crystallization of Ti BxThin Film after Deposition by Dual Beam IBAD Method,Materials Today Proceedings[J].2016,3(8):2646-2651
[85]王金晓,王志民,冯煜东,等.氧离子能量对离子束辅助沉积Al2O3薄膜的结构及光学性能的影响[J].真空科学与技术学报,2012,32(8):705-709
[86]张启沛,钟喜春,李春明,等.磁过滤电弧离子镀Ti N薄膜的制备及性能研究[J].真空科学与技术学报,2015,35(4):444-450
[87]王宇,黄美东,邬岩,等.脉冲偏压磁过滤电弧离子沉积(Ti,Al)N薄膜的研究[J].真空,2016,53(2):21-24
[88]Zhou H,Hou Q Y,Xiao T Q,et al.The Composition,Icrostructure and Mechanical Properties of Ni/DLC nanocomposite Films by Filtered Cathodicvacuum Arc Deposition[J].Diamond&Related Materials,2017,75:96-104
基本信息:
DOI：10.13922/j.cnki.cjovst.2017.07.15
中图分类号:TG174.4;TG71
引用信息:
[1]王铁钢,张姣姣,阎兵.刀具涂层的研究进展及最新制备技术[J].真空科学与技术学报,2017,37(07):727-738.DOI:10.13922/j.cnki.cjovst.2017.07.15.
基金信息:
国家自然科学基金项目(51301181);; 天津市应用基础与前沿技术研究计划(15JCZDJC39700);; 天津市科技特派员项目(16JCTPJC49500);; 天津市高等学校创新团队培养计划项目(TD12-5043)